Article - 1
Article - 1
A Review on Applications and Effects of Morphing Wing Technology on UAVs
Unmanned aerial vehicles (UAVs) have excelled with their ability to perform the intended task on or without personnel. In recent years, UAVs have been designed for civilian purposes as well as military applications. Morphing wings are changeable wing applications developed as a result of the need for a different lift and drag forces in various phases of the flight of aircraft. It is an application that enables altering the wing aspect ratio, wing airfoil, wing airfoil camber ratio, wing reference area and even different angles of attack are obtained in different parts of the wing. Although morphing wing application has just begun on today’s UAVs, modern airliners already have morphing wingtip devices such as Boeing 777-X’s. The benefits of the use of morphing wings for UAVs make this technology important. UAVs with morphing wing technology; may increase its payload ratio, may achieve a shorter take-off distance, may land and stop in shorter distance, may take-off where runway clearance is limited, has more efficient altitude change at lower engine RPMs, can obtain higher cruise speeds, may decrease its stall speed, may lower its drag if necessary, thus; saving energy and time. This study concludes a review of literature over morphing wing technology.
- Abdulrahim, M., & Cocquyt, J. (2002, April). Development of Mission capable Flexible-Wing Micro Air Vehicles. In 53rd Southeastern Regional Student Conference.
- Abdulrahim, M., & Lind, R. (2004, August). Flight testing and response characteristics of a morphing gull-wing morphing aircraft. In AIAA guidance, navigation, and control conference and exhibit (p. 5113).
- Abdulrahim, M. (2003, March). Flight dynamics and control of an aircraft with segmented control surfaces. In 42nd AIAA Aerospace Sciences Meeting and Exhibit (p. 128).
- Cadogan, D., Smith, T., Uhelsky, F., & Mackusick, M. (2004, April). Morphing inflatable wing development for compact package unmanned aerial vehicles.
- Bourdin, P., Gatto, A., & Friswell, M. (2006, June). The application of morphing cant angle winglets for morphing aircraft control. In 24th AIAA applied aerodynamics conference (p. 3660).
- https://www.santacruzgalapagoscruise.com/ experience-waved-albatrosses-galapagos
- Kuder, I. K., Arrieta, A. F., Raither, W. E., & Ermanni, P. (2013). Morphing stiffness material and structural concepts for morphing applications. Progress in Aerospace Sciences, 63, 33-55.
- Lee, S., Tjahjowidodo, T., Lee, H., & Lai, B. (2017). Investigation of a robust tendon-sheath mechanism for flexible membrane wing application in mini- UAV. Mechanical Systems and Signal Processing, 85, 252-266.
- Dayyani, I., Shaw, A. D., Flores, E. S., & Friswell, M. I. (2015). The mechanics of composite corrugated structures: a review with applications in morphing aircraft. Composite Structures, 133, 358-380.
- Diaconu, C. G., Weaver, P. M., & Mattioni, F. (2008). Concepts for morphing airfoil sections using bistable laminated composite structures. Thin-Walled Structures, 46(6), 689-701.
- Tong, X., Ge, W., Sun, C., & Liu, X. (2014). Topology optimization of compliant adaptive wing leading edge with composite materials. Chinese Journal of Aeronautics, 27(6), 1488-1494.
- Ursache, N. M., Melin, T., Isikveren, A. T., & Friswell, M. I. (2008, January). Technology integration for active poly-morphing winglets development. In Smart Materials, Adaptive Structures and Intelligent Systems (Vol. 43314, pp. 775-782).
- Jenett, B., Calisch, S., Cellucci, D., Cramer, N., Gershenfeld, N., Swei, S., & Cheung, K. C. (2017). Digital morphing wing: active wing shaping concept using composite lattice-based cellular structures. Soft robotics, 4(1), 33-48
- Ajaj, R. M., Flores, E. S., Friswell, M. I., Allegri, G., Woods, B. K. S., Isikveren, A. T., & Dettmer, W. G. (2013). The Zigzag wingbox for a span morphing wing. Aerospace Science and Technology, 28(1), 364-375.
- Campanile, L. F., & Sachau, D. (2000). The belt-rib concept: a structronic approach to variable camber. Journal of Intelligent Material Systems and Structures, 11(3), 215-224.
- Di Luca, M., Mintchev, S., Heitz, G., Noca, F., & Floreano, D. (2017). Bioinspired morphing wings for extended flight envelope and roll control of small drones. Interface focus, 7(1), 20160092.
- Gamboa, P., Aleixo, P., Vale, J., Lau, F., & Suleman, A. (2007). Design and testing of a morphing wing for an experimental UAV. Unıversity Of Beira Interior Covilha (Portugal).
- Wang, I., Gibbs, S. C., & Dowell, E. H. (2012). Aeroelastic model of multisegmented folding wings: theory and experiment. Journal of aircraft, 49(3), 911-921.
- Ajaj, R. M., & Jankee, G. K. (2018). The Transformer aircraft: A multimission unmanned aerial vehicle capable of symmetric and asymmetric span morphing. Aerospace Science and Technology, 76, 512-522.
- Hui, Z., Zhang, Y., & Chen, G. (2019). Aerodynamic performance investigation on a morphing unmanned aerial vehicle with bio-inspired discrete wing structures. Aerospace Science and Technology, 95, 105419.
- Zi, K. A. N., Daochun, L. I., XIANG, J., & CHENG, C. (2019). Delaying stall of morphing wing by periodic trailing-edge deflection. Chinese Journal of Aeronautics, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference (p. 180)
- Wu, M., Shi, Z., Xiao, T., & Ang, H. (2019). Energy optimization and investigation for Z-shaped suntracking morphing-wing solar-powered UAV. Aerospace Science and Technology, 91, 1-11.
- Ajaj, R. M., Friswell, M. I., Bourchak, M., & Harasani, W. (2016). Span morphing using the GNATSpar wing. Aerospace Science and Technology, 53, 38-46.
- Woods, B. K., & Friswell, M. I. (2015). The adaptive aspect ratio morphing wing: design concept and low fidelity skin optimization. Aerospace Science and Technology, 42, 209-217.
- Vocke III, R. D., Kothera, C. S., & Wereley, N. M. (2015). Development of a quasi-static spanextending blade tip for a morphing helicopter rotor. Journal of Aircraft, 52(3), 792-804.
- Communier, D., Botez, R. M., & Wong, T. (2020). Design and Validation of a New Morphing Camber System by Testing in the Price—Païdoussis Subsonic Wind Tunnel. Aerospace, 7(3), 23.